The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Le Mans 1 Le Mans 2 Le Mans 3 Le Mans Brakes

Sort by Title

Sort by Price

Page 3 of 10

1 2 3 4 5 6 7 8 9 10

Brake Disc Mounting Bobbin

BRA28610 Fits Cali 3, Le Mans 1000

Dimensions:
10.7mm x 22mm OD on section that locates in disc

Stainless steel brake disc mounting bobbin

part in stock 5 in stock

28613560 GU28613560 28 61 35 60
2861 3560 2861.3560 28.61.35.60

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper P08/F08 Pad Pin Kit

BRA54721A Fits G5, Convert, Cali 2, Cali 3, Cali 1100 (1994-1997), Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Spada ALL, T3, T4, T5, Mille GT

Dimensions:
Long pin 62mm x 6mm

Pad pin kit for Brembo P2 F08 (P8) calipers, consists of two long pins, one short and retaining spring.

replaces old Guzzi part ref. 14659100. Brembo ref. 120274210. NB finish on long pins may be zinc or black

part in stock 5 in stock

14659100 GU14659100 14 65 91 00
1465 9100 1465.9100 14.65.91.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£19.85

INC VAT

£16.54 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads EBC FA018

BRA54724 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Dimensions:
55.7 x 55 x9mm

Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

part in stock 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£19.30

INC VAT

£16.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Fine Thread

ELA07116 Fits Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, T5, 1000S, 1000 SP, SP II, Spada 3, G5, Convert, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, Mille GT, Nevada 350, Nevada 750 (1991-2003), V65 Florida, 750SP, Strada 750, 750T, 750 Targa

Dimensions:
M10 fine thread

Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

part in stock 5 in stock

79654116 GU79654116 79 65 41 16
7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport K�we, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS K�we, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

£21.40

INC VAT

£17.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Ball Bearing

ELA92708 Fits Daytona RS, Daytona Racing, 1100 Sport IE, Le Mans 1000, 1000S, Cali 3, Cali 1100 (1994-1997), Cali EV, Centauro, Mille GT, Strada 1000, V35 3, V50 PA, NTX 650, V65 Florida, 750 SP, Strada 750, 750 Targa, 750X, Nevada 750 (1991-2003), Quota 1100, Spada 3, V11 Sport

Dimensions:
3.9mm OD

Ball bearing for brakelight switch

part in stock 5 in stock

92295708 GU92295708 92 29 57 08
9229 5708 9229.5708 92.29.57.08

£0.90

INC VAT

£0.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Short Stainless Steel

SSA36794 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

part in stock 5 in stock

£8.20

INC VAT

£6.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Master Cylinder Angled Input Kit PS11, PS12 & PS15

BRA19500 Fits 1100 Sport ALL, Bellagio, Centauro, Le Mans 1000, Nevada ALL, V11 Sport, V65 ALL, V35 ALL, V50 ALL, Griso 1200, Daytona, SP II, 750 SP, Strada 750, 750 Targa, Le Mans 3, Spada 3, Strada 1000, 1000S, Mille GT

Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders

Also known as Brembo ref. 110312720

part in stock 4 in stock

19659500 GU19659500 19 65 95 00
1965 9500 1965.9500 19.65.95.00

£7.50

INC VAT

£6.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper Cover Brembo P08/F08 Single bleed

BRA38058 Fits 1000 SP, SP II, Spada 3, Cali 2, Cali 3, Cali 1100 (1994-1997), Le Mans 3, Le Mans 1000, Strada 1000, 1000S, T3, T4, T5

Brembo caliper cover for models with P2 F08 (P8) single bleed nipple calipers

You may need to immerse the cover in warm water before fitting

part in stock 4 in stock

17654760 GU17654760 17 65 47 60
1765 4760 1765.4760 17.65.47.60

£12.50

INC VAT

£10.42 EX VAT this is the price you will pay if you are ordering from outside the UK

M8 Bolt Hex Head 75mm Stainless Steel

SSA08075 Fits V35 II, V35 3, V35C, V50C, V50 3, Monza, Le Mans 2, Le Mans 3, Cali 3, 1000S, Le Mans 1000, 1100 Sport, V11 Sport, Daytona, Centauro, Cali 1100 (1994-1997), Cali EV, Quota 1100

Dimensions:
M8 x 75mm

M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor

part in stock 4 in stock

98052475 GU98052475 98 05 24 75
9805 2475 9805.2475 98.05.24.75

£1.40

INC VAT

£1.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads EBC FA018HH

BRA58724 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Pair of EBC FA018HH double-H sintered brake pads for P2 F08 (P8) calipers, best suited for fast road use. These give better braking but will wear brake discs more quickly than standard EBC pads

For P2 F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers.
With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round

part in stock 4 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

£24.80

INC VAT

£20.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 3 of 10

1 2 3 4 5 6 7 8 9 10